Contact


  Office/Recraft Bazaar: 270 Brevard Avenue - Cocoa, Florida - 32922     321-220-3379       info@recyclebrevard.org  

Office/Recraft Bazaar regular hours:  Sat 11am-5pm (always check our CALENDAR before planning a visit)

Social Media Links


Main Menu - Javascript

Counter Functions

Enter text to search the website

Monday, January 13, 2020

More Reasons to go Paperless

Going paperless in general has the advantage of saving paper and reducing waste - don’t get a printed copy of what you don’t need. 
But there’s an extra reason to say ‘no’ to printed cashier receipts: "When people handle receipts printed on thermal paper containing the endocrine disruptor bisphenol A (BPA), the chemical could linger in the body for a week or more (Environ. Sci. Technol. 2017, DOI: 10.1021/acs.est.7b03093)," reads the article from Chemical & Engineering News.

Consumer Reports adds, "Food is the top source of BPA exposure simply because so much of what we eat and drink comes packaged in BPA-containing plastic containers or cans (BPA is in the linings). But the form of BPA used in food containers is chemically bound, while the type used in thermal paper easily rubs off."  (https://www.consumerreports.org/cro/news/2014/03/the-health-risk-of-bpa-in-receipts/index.htm).
In that same article, John Warner, Ph.D., president of the Warner Babcock Institute for Green Chemistry, warns that "There's more BPA in a single thermal paper receipt than the total amount that would leach out from a polycarbonate water bottle used for many years," and the article goes on to inform readers that "Some manufacturers make “BPA free” thermal paper, but it’s often coated with a chemical called BPS. According to a 2014 report from the EPA, BPS may pose health hazards similar to BPA because the two chemicals are structurally alike and BPS is also easily transferred to skin." 

For the sake of our health, the best thing to do is to try to reduce our exposure to those chemicals, but how can we do that?

In a blog post, the Plastic Pollution Coalition compiled the following list:
  • Be aware that thermal paper discolors easily when scratched with a coin or paperclip.
  • Don’t accept receipts whenever possible.
  • Go with a paperless receipt via email or text message. This is an increasingly available option at many retailers.
  • If you must handle a receipt, try to touch only the nonglossy backside. It contains much less BPA.
  • Carefully store receipts. If you absolutely need a receipt, place it in an envelope. Its BPA will rub off on everything: your hands, pocket, wallet, or purse, even the folding money in your wallet.
  • Quickly wash your hands after touching a receipt. Scrub with soap and water. If you wait longer than four minutes, it’s too late.
  • Wear latex gloves if your job requires the frequent handling of receipts.
  • Don’t use a hand sanitizer after touching a possible thermal receipt - in a recent experiment, Dr. vom Saal and his team demonstrated that BPA levels went up to 185 times higher, “an absolute monster effect,” after the use of skin products such as hand sanitizers, sunscreens, and moisturizers. These products often contain chemicals called “dermal penetration enhancers” that break down the skin’s protective barrier to enhance delivery of the products’ active ingredients.
After reading about this, who doesn't want to say goodbye to receipts and try to go paperless?



Wednesday, January 8, 2020

Decluttering is Easier than Ever

At the beginning of every year there seems to be a frenzy to organize and/or declutter.  I think it has something to do with new year resolutions.  Whether you follow any of the minimalist recommendations or not, it takes time to do this if you want to do it right.

Recycle Brevard is based on the 3Rs - Reduce, Reuse and  Recycle.  We work tirelessly to help keep items out of the landfills.  We also encourage our friends to donate locally and support our neighbors through those donations.  However, we recently discovered that there's a program called Give Back Box which makes it incredibly easy, particularly for those folks who have mobility or transportation issues, to donate their used household goods in addition to reusing cardboard boxes.  Talk about waste diversion!  It certainly doesn't hurt that part of Give Back Box's mission statement is that they're "dedicated to protecting our environment through the philosophy of reduce, reuse, and recycle by helping people to donate items to charities using the same box".


The Give Back Box  program was founded in 2012 by Monika Wiela.  It's teamed up with some of the biggest retailers in the country, including but certainly not limited to Overstock, Amazon, LEGO, Viva Terra and many, many others.  And, in case I didn't mention this before, it costs you nothing at all to donate your goods.  And when I say nothing, I mean nothing. You no longer have to try to fit driving your donations around in your already busy schedule; just mail it to the Give Back Box and they will take care of the rest.

Give Back Box explains the program as easy as this:  Step 1:  Open your Box; Step 2: Pack your Box; Step 3:  Send your Box.

Now I have to say that I, personally, have never used this program since I reuse all of my cardboard boxes in my garden - thanks to a suggestion from a good friend of mine - and donate locally, but I think this is a terrific program because it offers a solution to a segment of our population who can use some help in this direction.

So, pack your boxes, print a free label from Give Back Box's website and let me know what you think.  It couldn't be much easier, that's for sure.


(Article contributed by Chris Kane, volunteer at Recycle Brevard)

Thursday, January 2, 2020

Can Smoke Detectors be recycled?

One of the chores that many families have at the beginning of the new year is changing the batteries on  their smoke and/or carbon monoxide detectors. This is one chore that can easily save your life. Occasionally, you’ll come across detectors that need to be replaced and this is where it gets a little more complicated. 

To start, there are four basic types of residential smoke detectors:

1. Ionization Smoke Alarms:  ionization smoke detectors are designed to detect fast, flaming fires.  They contain a small amount of a man-made, radioactive material, Americium-241, which emits minimal radiation, so it is considered safe for human exposure UNLESS the device has been tampered with.

2. Photoelectric Smoke Alarms:  Photoelectric smoke detectors function best for detecting smoky, smoldering fires.  Unlike ionization smoke alarms, photoelectric smoke detectors do not contain any radioactive material.

3. Dual-Sensor Smoke Alarms:  Dual-sensor smoke alarms combine ionization and photoelectric technology in one detector.  The combination of technologies helps the device detect both fast, flaming fires and smoky, smoldering fires, alleviating the need to install two separate detectors.

4. Combination Smoke/CO Alarms:  Combination Smoke and Carbon Monoxide alarms can detect both smoke and carbon monoxide.  Depending on the type of smoke detector in this combination, they may or may not contain radioactive material.

Most homes have the ionization types and this is problematic when you go to dispose of them as they contain a small amount of radioactive material.


DISPOSAL

On the Brevard County Solid Waste Management Dept. website (https://www.brevardfl.gov/SolidWaste/HouseholdHazardousWaste), they quote the Nuclear Regulatory Commission where they exempt these materials (smoke detectors) from regulatory requirements. NRC recommends disposal in your regular household trash or MAIL BACK to the manufacturer. 

Waste Management makes reference on their website (https://www.thinkgreenfromhome.com/ThinkGreenFromHome.cfm) to LampTracker which does, in fact, take back, via mail, smoke detectors (https://www.wmlamptracker.com/v2/product_smokedetector.cfm) for a fee.  However, the smallest container for you to purchase is $79.00, whose capacity is for 4-5 6 x 6 inch filters, which isn’t really practical for a residential customer.


I was able to find a couple of other companies which you can send your detectors to, for a price - these are only a few of the companies offering this service:

1. CuriePackSM Radioactive (Am-241) Smoke Alarm Recycling Kit -1 gallon (~4 Alarms)  cost is $49.99
It’s important to note that unidentifiable or disassembled/stripped down smoke alarms are NOT allowed in the 1 gallon CuriePack and will be surcharged at $8 each.

2. Smoke Detector (Consumer) Recycling Kit - $59 (capacity of around 5 units); IMPORTANT: This program is only for smoke detectors containing Americium 241.(Detectors containing other radioactive materials are not accepted.)

   
MANUFACTURERS

The best way to dispose of an ionization type detector is to return it to the manufacturer for responsible recycling.  However - and there’s always a however isn’t there? - not all manufacturers will take their products back.

In an ideal world, all manufacturers would be responsible for taking back their products at the end of life cycle. This would take the onus off of consumers for properly disposing of the products and back on the manufacturers where it rightly belongs. But, as of today, the ideal world is just a figment of imagination.

Something to think about when you’re purchasing your next detector is to purchase one from a manufacturer who specifically provides an end of life recycling option.

Doing research for this article, I found references to several different websites that contain information for a variety of manufacturers, but unfortunately very little of it was up to date. Information which I verified with individual manufacturers is listed later in this article, but I need to emphasize that prior to sending your detectors back to the manufacturer you should always contact them to be sure the information provided is up to date as it changes quite frequently. 

The main manufacturers of smoke detectors and CO alarms are:  First Alert and Kidde, representing ¾ of the market. Other manufacturers include:  Nest, Swann, Gentex, Firex, Code One, Honeywell, Universal Security Instruments and Panasonic.

Typically, there is a label on the back of your smoke detector which contains the name and address of the manufacturer.  They should be contacted for appropriate disposal information as, unfortunately, each manufacturer is different. 


Following is a sample of the differences between various manufacturers and instructions:

1. Kidde manufactures CodeOne & FirexOn Kidde’s website they recommend contacting your local fire department to verify compliance with any jurisdictional ordinances or requirements.  After contacting them, they told me that they do, in fact, have an individual consumer disposal program.  Like most things, it’s not simple and requires the consumer to fill out a form to receive authorization to send in their alarm.  The consumer pays all costs associated with the return of the alarm.  I have a copy of the form which they forwarded to me.


2. Gentex
Although they recommend recycling them at local facilities (which we don’t have), they did check with their applications engineer who said that they could be sent back to his attention, but we need to be certain to mark the box ‘RECYCLE”.

Gentex Corporation
11768 James Street
Holland, MI 49424
Attention:  Jim Bohn

3. First Alert
Will accept up to 4 of First Alert devices at a time.  You need to call ahead for mailing instructions.  The number is 800-323-9005 ext. 2; customer service department. The company’s address is 3920 Enterprise Court, Aurora, Il 60504.  Again, you pay costs.


4. Nest
Google (Nest’s manufacturer)  is the only manufacturer  I could find where recycling  was totally free for residents. Mail your device to be recycled (US only)

Google offers a free mail back program through its partner, Reverse Logistics Group Americas (RLGA), for google’s customers. RLGA only accepts Nest Smoke Detectors for recycling. To use the mail back program, follow the steps below:

After reading this information, I’m sure you can see how complicated this is.  It shouldn’t be that way - obviously.  However, it is, and until it’s changed we have to go through the process.

The best way to make the necessary changes is to contact the manufacturers of your smoke detectors and if they don’t accept them back, write to them and tell them they should be responsible for the return of their products at the conclusion of their life cycle.  That would be a start.

(Article contributed by Chris Kane, volunteer at Recycle Brevard)


Contact Us

Name

Email *

Message *